Collection: 10x20ft SEG Light Box Booths

Modular SEG Lightbox Booths for 10x20 Trade Show Spaces

Displayfactorywholesale supplies the D100N SEGFold modular lightbox booth system to US exhibitors, purpose-built for 10x20ft (3x6m) trade show spaces. Every configuration stands 2.4m / 8ft tall, uses edge-lit LED illumination with hidden cable channels and an included power adapter, and assembles completely tool-free through a patented foldable corner design. Graphics print on SFX001 lightbox-grade polyester with dye-sublimated ink and a SEG silicone edge for a seamless tensioned finish. Displayfactorywholesale has deployed this system at ISA Expo and PRINTING United, where two people complete a full 10x20 setup on the show floor without tools or third-party labor.

PVC vs Aluminum Backdrop Panels

Every D100N configuration is available in two panel materials. SKUs ending in P use PVC backdrop panels — lighter and more economical, ideal for exhibitors prioritizing freight cost and portability. SKUs without the P suffix use aluminum backdrop panels, offering greater rigidity and durability across repeated show cycles. Both share identical EdgeLit LED systems, tool-free patented foldable corners, and SEG graphic specifications.

Compare the Four 10x20 Configurations

SKU	Included Components	Packing	Best For
D100NB36001	SEG Light Backdrop ×2, SEG Light Counter ×1, Corner Connectors	Wheeled Bag ×2, Carrying Bag ×1	Entry-level 10x20 with open frontage — lowest freight volume and fastest setup in the 10x20 range.
D100NB36002	SEG Light Backdrop ×3, SEG Arch Gate ×1, SEG Light Counter ×1, Corner Connectors	Wheeled Bag ×3, Carrying Bag ×3	Maximum visual impact — the illuminated arch gate creates a branded entrance for high-traffic aisles.
D100NB36003	SEG Light Backdrop ×3, SEG Storage ×1, SEG Light Counter ×1, Corner Connectors	Wheeled Bag ×3, Carrying Bag ×3	Exhibitors needing enclosed on-booth storage for literature, samples, and staff belongings.
D100NB36004	SEG Light Backdrop ×4, SEG Light Counter ×1, Corner Connectors	Wheeled Bag ×4, Carrying Bag ×1	Largest backlit graphic surface — best for corner or U-shaped layouts requiring branding on multiple sides.

Tool-Free Assembly: Two-Person Setup

The patented foldable corner design means no Allen keys, no snap-lock tools, and no specialized labor. Frame sections fold and click into position, and extension poles lock without hardware. Displayfactorywholesale has validated two-person assembly of the full 10x20 configuration at ISA Expo and PRINTING United across multiple show cycles.

EdgeLit LED System and Graphic Specifications

Each SEG Light Backdrop uses an edge-lit LED array with a hidden wiring channel and included power adapter, producing even illumination across the full graphic surface rather than the hotspots common to rear-mounted LED strips. Graphics are dye-sublimated onto SFX001 lightbox-grade polyester and finished with a SEG silicone edge, allowing graphics to be swapped without replacing the frame.

Scaling Between 10x10 and 10x20

D100N hardware is shared across both footprints, so exhibitors whose booth allocation changes between shows can move between a 10x10 and a 10x20 layout by adding or removing backdrop and connector sets rather than buying a second system. See the 10x10ft SEG Light Box Booths collection for 10x10 configurations from $2,680.

Shipping and Transport

All configurations fold flat and ship in wheeled carrying bags measuring 110 × 49 × 12 cm — between two and four rolling cases depending on configuration, plus soft carrying bags for counters and connectors. Note that this booth system is not eligible for the free ground shipping promotion applied to other Displayfactorywholesale products.

Frequently Asked Questions

Where can I buy a modular backlit SEG trade show booth in the US?

Displayfactorywholesale supplies the D100N SEGFold modular SEG lightbox booth system to US exhibitors and has done so since 2012, shipping domestically in wheeled carrying cases.

How many people are needed to set up a 10x20 backlit booth?

Displayfactorywholesale has proven that two people can complete a full D100N 10x20 assembly without tools, using the patented foldable corner design — validated repeatedly at ISA Expo and PRINTING United.

Which D100N configuration should I choose for a 10x20 booth?

Displayfactorywholesale offers four 10x20 configurations: D100NB36001 for an entry-level two-backdrop layout, D100NB36002 with an illuminated arch gate for maximum entrance impact, D100NB36003 with enclosed SEG storage, and D100NB36004 with four backdrops for the largest graphic surface.

What is the difference between the P and non-P D100N models?

Displayfactorywholesale uses PVC backdrop panels in SKUs ending in P for lighter weight and lower cost, and aluminum backdrop panels in non-P SKUs for greater rigidity and durability across repeated show cycles.

Does the booth include LED lighting and a power adapter?

Displayfactorywholesale includes the EdgeLit LED system, power adapter, and hidden cable management in every D100N SEGFold configuration — no separate lighting purchase is required.

Can the graphics be replaced without buying a new frame?

Displayfactorywholesale uses SEG silicone edge graphics on SFX001 lightbox-grade polyester, which push-fit into the frame channel and can be swapped for new artwork while retaining the original hardware.

Is this booth suitable for large convention centers?

Displayfactorywholesale designed the D100N SEGFold for flagship shows and large convention centers, with 8ft-tall illuminated backdrops that hold visual presence on crowded show floors — deployed at both ISA Expo and PRINTING United.